Fujitsu Siemens Computers PRIMERGY BX, Описание

Страница: 142 / 674

Main Menu Web-Based Management Interface
Lan Switch and Router Blade
142
6.2.2.7.4. Configuring each Port CST Configuration Page
Selection Criteria
Slot/Port
- Selects one of the physical or LAG interfaces associated with VLANs
associated with the CST.
Configurable Data
Port Priority
- The priority for a particular port within the CST. The port priority is set in
multiples of 16. For example, if you attempt to set the priority to any value between 0 and
15, it will be set to 0. If you attempt to set any value between 16 and (2*16-1) it will be set
to 16 and so on.
Admin Edge Port
- Specifies if the specified port is an Edge Port within the CIST. It takes
a value of Enable or Disable, where the default value is Disable.
Port Path Cost
- Set the Path Cost to a new value for the specified port in the common
and internal spanning tree. It takes a value in the range of 1 to 200000000.
Non-Configurable Data
Auto-calculate Port Path Cost
- Displays whether the path cost is automatically
calculated (Enabled) or not (Disabled). Path cost will be calculated based on the link
speed of the port if the configured value for Port Path Cost is zero.
Port ID
- The port identifier for the specified port within the CST. It is made up from the port
priority and the interface number of the port.
Port Up Time Since Counters Last Cleared
- Time since the counters were last cleared,
displayed in Days, Hours, Minutes, and Seconds.
Port Mode
- Spanning Tree Protocol Administrative Mode associated with the port or LAG.
The possible values are Enable or Disable.
Port Forwarding State
- The Forwarding State of this port.