manualshive.com logo in svg

Fujitsu Siemens Computers PRIMERGY BX, Описание

Поделиться
Скачать
Page 510
Fujitsu Siemens Computers PRIMERGY BX Скачать руководство пользователя страница 510

Differentiated Service Command                                           Command Reference   

Lan Switch and Router Blade

 

510 

redirect <slot/port> 

 

 

 
 

Command Mode 

  Policy-Class-Map Config 

 

7.15.3.4 conform-color 

This command is used to enable color-aware traffic policing and define the conform-color class 
maps used. Used in conjunction with the police command where the fields for the conform level 
(for simple, single-rate, and two-rate policing) are specified. The <class-map-name> parameter 
is the name of an existing Diffserv class map, where different ones must be used for the 
conform and exceed colors.

 

 
 

 

 

 

Syntax 

 

conform-color <class-map-name> 

 

 

<class-map-name> - 

Name of an existing Diffserv class map, where different ones must 

be used for the conform colors. 

 
 

Command Mode 

  Policy-Class-Map Config 

 

7.15.3.5 mark 

cos 

This command marks all packets for the associated traffic stream with the specified class of 
service value in the priority field of the 802.1p header. If the packet does not already contain 
this header, one is inserted. The CoS value is an integer from 0 to 7.

 

 
 

 

 

 

Syntax 

 

Содержание PRIMERGY BX



































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды