Fujitsu Siemens Computers PRIMERGY BX, Описание

Страница: 154 / 674

Main Menu Web-Based Management Interface
Lan Switch and Router Blade
154
Response Time
- Enter the value you want the switch to use for the ARP response
timeout. You must enter a valid integer, which represents the number of seconds the
switch will wait for a response to an ARP request. The range for this field is 1 to 10
seconds. The default value for Response Time is 1 second.
Retries
- Enter an integer which specifies the maximum number of times an ARP request
will be retried. The range for this field is 0 to 10. The default value for Retries is 4.
Cache Size
- Enter an integer which specifies the maximum number of entries for the
ARP cache. The range for this field is 256 to 3200. The default value for Cache Size is
3200.
Dynamic Renew
- This controls whether the ARP component automatically attempts to
renew ARP Entries of type Dynamic when they age out. The default setting is Enable.
Remove from Table
- Allows the user to remove certain entries from the ARP Table. The
choices listed specify the type of ARP Entry to be deleted:
ƒ
All Dynamic Entries
ƒ
All Dynamic and Gateway Entries
ƒ
Specific Dynamic/Gateway Entry
- Selecting this allows the user to specify the
required IP Address
ƒ
Specific Static Entry
- Selecting this allows the user to specify the required IP
Address
ƒ
Specific Interface
- Selecting this allows the user to specify the required interface
ƒ
None
- Selected if the user does not want to delete any entry from the ARP Table
Remove IP Address
- This appears only if the user selects Specific Dynamic/Gateway
Entry or Specific Static Entry in the Remove from Table Drop Down List. Allows the user
to enter the IP Address against the entry that is to be removed from the ARP Table.
Slot/port
- The routing interface associated with the ARP entry.
Non-Configurable Data
Total Entry Count
- Total number of Entries in the ARP table.
Peak Total Entries
- Highest value reached by Total Entry Count. This counter value is
restarted whenever the ARP table Cache Size value is changed.
Active Static Entries
- Total number of Active Static Entries in the ARP table.
Configured Static Entries
- Total number of Configured Static Entries in the ARP table.
Maximum Static Entries
- Maximum number of Static Entries that can be defined.
IP Address
- The IP address of a device on a subnet attached to one of the switch's
routing interfaces.
MAC Address
- The unicast MAC address for the device. The format is six two-digit
hexadecimal numbers separated by colons, for example 00:06:29:32:81:40.
Slot/port
- The routing interface associated with the ARP entry.