Device Configuration Commands Command Reference
Lan Switch and Router Blade
299
Total Transmit Errors
FCS Errors:
The total number of packets transmitted that had a length (excluding framing
bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad
FCS with an integral number of octets
Tx Oversized:
The total number of frames that exceeded the max permitted frame size.
This counter has a max increment rate of 815 counts per sec. at 10 Mb/s.
Underrun Errors:
The total number of frames discarded because the transmit FIFO buffer
became empty during frame transmission.
Total Transmited Packets Discards
Single Collision Frames:
A count of the number of successfully transmitted frames on a
particular interface for which transmission is inhibited by exactly one collision.
Multiple Collision Frames:
A count of the number of successfully transmitted frames on
a particular interface for which transmission is inhibited by more than one collision.
Excessive Collisions:
A count of frames for which transmission on a particular interface
fails due to excessive collisions.
GVRP PDUs Received:
The count of GVRP PDUs received in the GARP layer.
GVRP PDUs Transmitted:
The count of GVRP PDUs transmitted from the GARP layer.
GVRP Failed and Registrations:
The number of times attempted GVRP registrations could
not be completed.
GMRP PDUs received:
The count of GMRP PDUs received in the GARP layer.
GMRP PDUs Transmitted:
The count of GMRP PDUs transmitted from the GARP layer.
GMRP Failed Registrations:
The number of times attempted GMRP registrations could not
be completed.
STP BPDUs Transmitted:
Spanning Tree Protocol Bridge Protocol Data Units sent.
STP BPDUs Received:
Spanning Tree Protocol Bridge Protocol Data Units received.
RSTP BPDUs Transmitted:
Rapid Spanning Tree Protocol Bridge Protocol Data Units sent.
RSTP BPDUs Received:
Rapid Spanning Tree Protocol Bridge Protocol Data Units
received.
MSTP BPDUs Transmitted:
Multiple Spanning Tree Protocol Bridge Protocol Data Units
sent.
MSTP BPDUs Received:
Multiple Spanning Tree Protocol Bridge Protocol Data Units
received.
EAPOL Frames Received:
The number of valid EAPOL frames of any type that have been
received by this authenticator.
EAPOL Frames Transmitted:
The number of EAPOL frames of any type that have been
transmitted by this authenticator.
Time Since Counters Last Cleared:
The elapsed time, in days, hours, minutes, and
seconds since the statistics for this port were last cleared.
The display parameters when the argument is ‘switchport’ are as follows:
Total Packets Received (Octets):
The total number of octets of data received by the
processor (excluding framing bits but including FCS octets).
Packets Received Without Error:
The total number of packets (including broadcast
packets and multicast packets) received by the processor.
Unicast Packets Received:
The number of subnetwork-unicast packets delivered to a
higher-layer protocol.
Multicast Packets Received:
The total number of packets received that were directed to a
multicast address. Note that this number does not include packets directed to the broadcast
address.
Содержание PRIMERGY BX
