Fujitsu Siemens Computers PRIMERGY BX, Описание

Страница: 32 / 674

Start up and Configuration the Ethernet Switch Module Configuration the Switch Blade Module
Lan Switch and Router Blade
32
2.2.2 Status of LEDs
The front panel contains light emitting diodes (LED) that indicate the status of links, and switch
diagnostics.
Port LEDs
Each of uplink port has two LED indicators.
One Gbe Port LED definition:
LED Color Function
Orange Port Link at 1000 Mbps
Green Port Link at 100 Mbps
LED-A
(Speed)
Off Port Link at 10 Mbps
Yellow Network Link
Yellow Blink Network Activity
LED-B
(Link/Activity)
Off No Network Link or port disable
Power, Manage, 10GbE Port of LED indicator:
LED Color Function
TOP Green Power LED
Middle 2 Green Identify LED
Middle 1 Green 10GbE-XFP Port Link/Activity
BUTTOM Green 10GbE-CX4 Port Link/Activity
System LED
There is one Ethernet Switch Module system LED with dual functions, controlled by MMB for
error status reporting and blade identification. Different flashing frequencies are used to
indicate the different functions. There are two functions, identification and error reporting, with
identification having a higher priority than error reporting.
NOTE:
If there is an error and the identification function is activated, the LED still functions as
an identification LED. The LED can only be disabled by the MMB with a 255 seconds timeout. If
an error is happening, the LED for error reporting will always be flashing and cannot be turn off.
The following table describes the system LED indications.