Fujitsu Siemens Computers PRIMERGY BX, Описание

Страница: 476 / 674

SNTP (Simple Network Time Protocol) Commands Command Reference
Lan Switch and Router Blade
476
Server Reference ID
Reference clock identifier of the server for the last received valid
packet.
Server Mode
SNTP Server mode.
Server Max Entries
Total number of SNTP Servers allowed.
Server Current Entries
Total number of SNTP configured.
For each configured server:
IP Address
IP Address of configured SNTP Server.
Address Type
Address Type of configured SNTP server.
Priority
IP priority type of the configured server.
Version
SNTP Version number of the server. The protocol version used to query the server
in unicast mode.
Port
Server Port Number
Last Attempt Time
Last server attempt time for the specified server.
Last Update Status
Last server attempt status for the server.
Total Unicast Requests
Number of requests to the server.
Failed Unicast Requests
Number of failed requests from server.
7.13.2 Configuration Commands
7.13.2.1 sntp broadcast client poll-interval
This command will set the poll interval for SNTP broadcast clients in seconds as a power of two
where <poll-interval> can be a value from 6 to 16.
Syntax
sntp broadcast client poll-interval <6-10>
no sntp broadcast client poll-interval
<6-10> -
The range is 6 to 16.
no -
This command will reset the poll interval for SNTP broadcast client back to its default
value.
Default Setting
6
Command Mode
Global Config