Fuji Xerox apeosport-IV 6080, Руководство администратора

Страница: 256 / 705

5 Tools
256
T
ools
5
System Administrator's Passcode
Set the passcode for the System Administrator.
Setting a passcode is strongly recommended to enhance security.
Note • The default of the system administrator's passcode is “x-admin”.
The system administrator's passcode set here is used when [Passcode Entry for Control
Panel Login] is set to [On] under [Authentication/Security Settings] > [Passcode Policy].
Set the passcode after setting the system administrator's user ID. You can set the passcode
from 4 to 12 characters.
For more information about Passcode Entry for Control Panel Login, refer to "Passcode Policy" (P.261).
1
Select [System Administrator's Passcode].
2
Select [New Passcode].
3
Enter a new passcode (4 to 12 digits) using
the keyboard displayed, and then select
[Save].
Note • If no passcode is set, leave the text boxes
blank and select [Save].
4
Select [Retype Passcode], enter the same
passcode, and then select [Save].
5
Select [Save].
6
A confirmation window appears. Select [Yes] to confirm your entry.
Authentication
In [Authentication], you can set the following items.
The following shows the reference section for each setting.
Login Type................................................................................................................................256
Access Control ..........................................................................................................................257
Create/View User Accounts......................................................................................................258
Reset User Accounts .................................................................................................................258
Create Authorization Groups ....................................................................................................258
User Details Setup.....................................................................................................................259
Maximum Login Attempts by System Administrator...............................................................261
Passcode Policy.........................................................................................................................261
Charge/Private Print Settings....................................................................................................261
Login Type
Allows you to select a type of authentication.
„ No Login Required
Does not use the Authentication feature.
„ Login to Local Accounts
Authenticates users based on the user information registered on the machine.
Note • When [Login to Local Accounts] is selected, the machine enters the Login mode and [Login]
is displayed at the lower left of the [Services Home] screen.