Fuji Xerox apeosport-IV 6080, Руководство администратора

Страница: 173 / 705

Connectivity & Network Setup
173
T
ools
5
„ Secondary Server - IP Address
Enter the IP address of the secondary server. Up to 255 characters are allowed. You can
specify the addresses by IPv4 address, IPv6 address, and FQDN.
„ Secondary Server - Port Number
Set the secondary server port number from 1 to 65535.
The default value is 5060.
„ Secondary Server - Login User Name
Enter the login user name of the secondary server. Up to 31 characters are allowed.
„ Secondary Server - Login Password
Enter the login password of the secondary server. Up to 31 characters are allowed.
„ Secondary Server Type
Select the type of secondary server from [Standard] or [Cisco].
SIP Registrar Server Setup
Configure SIP registrar server settings. You can set a primary server and a secondary server.
Note • You can use up to two SIP
registrar
servers.
• Select [Cisco] for a server type.
„ Primary Server - IP Address
Enter the IP address of the primary server. Up to 255 characters are allowed. You can specify
the addresses by IPv4 address, IPv6 address, and FQDN.
„
Primary Server - Port Number
Set the primary server port number from 1 to 65535.
The default value is 5060.
„ Primary Server - Login User Name
Enter the login user name of the primary server. Up to 31 characters are allowed.
„ Primary Server - Login Password
Enter the login password of the primary server. Up to 31 characters are allowed.
„
Primary Server Type
Select the type of primary server from [Standard] or [Cisco].
„ Secondary Server - IP Address
Enter the IP address of the secondary server. Up to 255 characters are allowed. You can
specify the addresses by IPv4 address, IPv6 address, and FQDN.
„ Secondary Server - Port Number
Set the secondary server port number from 1 to 65535.
The default value is 5060.
„ Secondary Server - Login User Name
Enter the login user name of the secondary server. Up to 31 characters are allowed.
„ Secondary Server - Login Password
Enter the login password of the secondary server. Up to 31 characters are allowed.
„ Secondary Server Type
Select the type of secondary server from [Standard] or [Cisco].
VoIP Gateway Setup
You can configure the following settings for VoIP Gateway 1 to 50.
You can also configure different VoIP gateways by a recipient
'
s telephone number.
Note • To use a fixed VoIP gateway, do not register the ID, and specify only the IP address for VoIP
Gateway 1.
• You cannot use a VoIP gateway in an IPv6 network.