Fuji Xerox apeosport-IV 6080, Руководство администратора

Страница: 457 / 705

Error Code
457
Pr
o
b
lem S
o
lving
15
016-405 [Cause] An error occurred in the certificate stored in the machine.
[Remedy] Initialize the certificate.
For more information on initializing certificates, refer to "Delete All Certificates/Initialize
Settings" (P.135).
016-406
[Cause] An error occurred in the SSL client certificate.
[Remedy] Take one of the following measures:
1)Store an SSL client certificate in the machine, and set it as the SSL
client certificate.
2)If the SSL client certificate cannot be set, select an authentication
method other than SSL.
016-407
016-408
016-409
016-410
016-411
016-412
[Cause] After automatically obtained the IP address, the machine failed to
retrieve proxy server settings from the DHCP server.
[Remedy] Modify the customized program and install it again.
016-413
[Cause] There is a problem with the customized program registered on the
machine.
[Remedy] Check the followings:
z
The default gateway setting
z
The subnet mask setting
z
The DNS server address settings
If the error still is not resolved after checking the above settings, there
may be a network failure or a DNS server failure. Consult your system
administrator.
016-414 [Cause] A network error occurred.
[Remedy] Check the followings:
z
The LAN cable connection
z
The IP address setting
z
The default gateway setting
z
The subnet mask setting
z
The DNS server address settings
z
The proxy server setting
If the error still is not resolved after checking the above settings, there
may be a network failure. Consult your system administrator.
016-417
[Cause] Communications with the Xerox Communication server failed.
[Remedy] Check the followings:
z
The IP address setting
z
The default gateway setting
z
The subnet mask setting
z
The DNS server address settings
z
The server verification feature of the destination server is disabled
If the error still is not resolved after checking the above settings, there
may be a network failure. Consult your system administrator.
016-450 [Cause] The SMB host name already exists.
[Remedy] Change the host name.
Refer to "Host Name" (P.169).
016-453
[Cause] Updating of the IPv6 address and host name for the DNS server failed.
[Remedy] Check whether the IP address of the DNS server is set correctly.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.