Fuji Xerox apeosport-IV 6080, Руководство администратора

Страница: 259 / 705

Authentication/Security Settings
259
T
ools
5
„ Restrict Recipient Selection Method
Select whether or not to remove restriction when a transmission to a recipient who is not
registered on the Address Book is restricted for the Fax/Internet Fax or Scan
feature.
„ Restrict User to Edit Address Book
Select whether or not to remove restriction when the edit of the Address Book is restricted.
„ Allow User to Disable Active Settings
Select whether or not to permit the group members to temporarily disable the forcible printing
features, such as the Force Watermark, Force Secure Watermark, Print Universal Unique ID,
and Force Annotation features, and to allow the machine to process a job.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
„ When Protection Code is Detected
Select whether or not to temporarily allow the machine to process a job even if the machine
detects a protection code embedded in a document.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
User Details Setup
Set the information required when carrying out authentication.
„ Alternative Name for User ID
If required, you can change the indication "UserID" on the [Login] screen that appears when
the <Log In/Out> button on the control panel is pressed to another name such as “User
Name” or “Number”. The alias can be set to 1 to 15 single-byte characters.
Note • The name changed is also printed in a report or a list.
„ Mask User ID (***)
You can set how an entered user ID is shown on the screen. Use this feature to enhance
security as required.
When you select [Show], the characters you enter are echoed on the screen in the normal
way as you enter the user ID. When you select [Hide], the characters you enter is hidden as a
row of asterisks (*****) as you enter the user ID.
„ Failed Access Log
Set the failure count to detect unauthorized access. An error is logged if authentication fails
the number of times specified here within a predetermined time (10 minutes).
„ Logout Confirmation Screen
Set whether or not to display a logout confirmation screen every time a user session ends.
„ User ID for Login
Set whether or not to make the user ID entry field on the user login screen case-sensitive.
When you select [Case Sensitive], authentication is performed using the User ID as
registered (including upper and lower cases). When you select [Non-Case Sensitive],
authentication is performed with case ignored even if the User ID has both upper and lower
cases.
Important • Do not change the setting while a file is stored for the Private Charge Print. Otherwise, you
may encounter problems, such as being unable to print. Change the setting after the
machine prints all the files stored.
• Do not select [Case Sensitive] when the machine stores User IDs such as "ABC" and "abc"
which are regarded as the same ID under the setting. If you select [Case Sensitive], it may
cause the problem and those IDs may not be displayed. Before you select the setting,
correct those User IDs to distinguish them.
„ When Smart Card Reader is Connected
Set whether or not to enable user ID authentication when the smart card reader is connected.
When [Smart Card Login] is selected, user ID authentication cannot be used. When [Smart
Card or Control Panel Login] is selected, both smart card authentication and user ID
authentication can be used.