Fuji Xerox apeosport-IV 6080, Руководство администратора

Страница: 416 / 705

15 Problem Solving
416
P
roblem S
o
lv
ing
15
The Copy Result is Not What was Expected
If the copy result is not what was expected, identify the symptom in the following table
to perform the remedy.
Symptom Cause Remedy
The copy is dirty. The document glass or the
document cover is soiled.
Clean the document glass or the document
cover.
Refer to "Cleaning the Document Cover and
Document Glass" (P.74).
The document is a
transparent type such as a
transparency film. If the document is transparent, dirt on the
document cover may be copied. Place a
white sheet of paper on top of the
document when copying.
The document is colored,
rough, or a blueprint. The paper's background color is copied.
Adjust the copy density or image quality, or
specify [Suppress Background].
The document is glossy
printing paper. Glossy printing paper easily sticks to the
document glass, and shadows are
sometimes copied, soiling the image.
Place a transparency film under the
document when copying.
The copy is too
dark or light. The copy density is set to
[Darken] or [Lighten]. Adjust the copy density.
Refer to "3 Copy" > "Image Quality" in the
User Guide.
The document density is too
light. Adjust the copy density.
Refer to "3 Copy" in the User Guide.
The setting for [Original
Type] is inappropriate for
the document. Copy black text. If the printout is too light,
select [Text] for [Original Type].
Refer to "3 Copy" > "Image Quality" in the
User Guide.
The copy is
slightly
misaligned. Paper is misaligned in the
tray. Align the paper edges, and adjust them to
the tray's top corners to reload the paper.
Refer to "Loading Paper" (P.42).
Part of the image
is missing on the
copy. The paper is damp. If the paper is damp, the copy image may
be partially missing or unclear. Replace the
paper with new one.
Refer to "Loading Paper" (P.42).
Folded or wrinkled paper is
included in the tray. Remove the unsuitable paper or replace all
of the paper with new one.
Refer to "Loading Paper" (P.42).
The document is pasted or
folded. The pasted or folded section may not be
laying flat on the document glass. Place a
stack of white sheets on top of the
document to flatten the document against
the document glass.
The copy has a
stripe pattern. The document enlargement
ratio is too large. Vertical stripes may be printed on the
copies depending on the ratio. Adjust the
ratio to eliminate the stripes.
Refer to "3 Copy" > "Copy" > "Reduce/Enlarge
(Making Enlarged/Reduced Copies)" in the
User Guide.