FT-111(D) Panel Weighing Indicator, Technical Manual, Rev.1.0.0, May 2019
Page
65
of
146
[ 9-- DIAGNOSTIC ] Diagnostic Block
[
9-- DIAGNOSTIC
]
DIAGNOSTIC MAIN BLOCK
Press
key sequentially to access this main block,
or press key or
key to enter configuration parameters,
or press
key to go to the next block,
or press
key to exit from programming.
[
91- HARDWARETEST
]
HARDWARE TESTING
Press key or
key again to enter this menu.
Or press
key to go to the next sub-block.
[
911 KEY
]
Key testing
[
912 RS232
]
RS232C serial port testing
[
913 RS485
]
RS485 serial port testing
[
914 RS422
]
RS422 serial port testing
[
915 USB
]
USB port testing
[
916 IN / OUT
]
Digital Input / Output testing
[
917 DISPLAY
]
Display testing
[
918 LC SIGNAL mV
]
Load cell signal measuring in millivolt (only FT-111)
[
918 DLC COUNTS
]
Internal count values of the digital Load cell(s) (only FT-111 D)
[
919 PRINTER
]
Printer testing
[
92- HISTORY
]
HISTORY
Press key or
key again to enter this menu.
Or press
key to go to the next sub-block.
[
921 PEAK LOAD
]
The last 20 peak loads listed in this parameter.
[
922 UNDER LOGS
]
The last 20 under errors listed in this parameter.
[
923 ERROR LOGS
]
The last 20 errors listed in this parameter.
[
924 ENTRY LOGS
]
The last 20 Service/User entry listed in this parameter.
