Fast 9500 Скачать руководство пользователя страница 55

Страница: 55 / 116

AXLES, TIRES, and TRACKS

AXLES, TIRES, and TRACKS

Boom Sprayer 9500 / 9600

Page 55

AXLES, TIRES, and TRACKS

Setting Axle Width

IMPORTANT: Adjust axles out of the

shipping width before transporting or

application. Set axles to the widest

setting possible to match row width.

Use

only

the

holes

with

measurements. See axle width charts.

Jack one side up on frame in front of

axle and support the frame on the

rear of the axle with jack stands (A).

10-ton jack stand shown.

Remove the axle bolts (F) and slide

the axles (B) out of shipping holes

(C).

Using a forklift (D) or pallet jack (E),

slide the wheel and axle tube (B) out

to the holes matching row width (See

axle width charts). Axles (B) must be

moved out from shipping holes (C) to

match crop spacing, to prevent crop

damage, and for stability. Set both

axles to the same width.

Reinstall the axle hardware with the

threads facing up.

Torque the 5/8” bolts to 149 N-m (110

ft-lbs.) and the 3/4” bolts to 271 N-m

(200 ft-lbs.).

Repeat for other side.

Содержание 9500





















































































































Результаты поиска

Содержание 9500

Отзывы:

Похожие инструкции для 9500

Бренды по названию

Популярные бренды

Fast 9500, Руководство пользователя

Результаты поиска

Содержание 9500

Отзывы:

Похожие инструкции для 9500

Бренды по названию

Популярные бренды