Fast 9500, Руководство пользователя

Страница: 109 / 116

PREPARING FOR STORAGE
PREPARING FOR STORAGE Boom Sprayer 9500 / 9600 Page 109
PREPARING FOR STORAGE
CAUTION: Store the unit in an area
away from human activity. Do not
permit children to play on or around
the stored Sprayer.
IMPORTANT: Do not use the tank to
store petroleum products. They will
soften the polyethylene tank and be
absorbed by it.
At the end of the season, thoroughly inspect
and prepare the Sprayer for storage. Repair
or replace any worn or damaged
components to prevent any unnecessary
downtime at the beginning of next season.
1. Empty any remaining liquid from
tank. Flush the entire system with
clean freshwater.
2. Open all liquid line connections, the
end cap screen canister, and pump.
Drain all fluids out of the system.
3. Add approximately 38 L (10 gal) of
RV antifreeze per 3 m (10 ft.) of
boom.
4. Circulate the fluid for five minutes to
reach all parts of all circuits.
5. Flush the system, then pump through
screens, valves, nozzles, check
valves, and orifices/tips.
6. Thoroughly wash the machine using
a pressure washer to remove all dirt,
mud, debris, and residue to protect
against corrosion.
7. Remove the nozzles from the boom.
Disassemble and wash the nozzle,
spring, diaphragm, and housing of
the nozzle assemblies before storing
in a non-freezing environment.
8. Lubricate all grease points. Make
sure all grease cavities have been
filled with grease to remove any
water residue from washing.
9. Inspect all hydraulic hoses, couplers,
and fittings. Tighten any loose fittings.
Replace any hose that is damaged or
is separating from the crimped end of
a fitting.
10. Inspect all liquid lines and
connections. Tighten any loose
fittings. Replace any line that is cut,
nicked, or abraded.
11. Touch up all paint nicks and
scratches to prevent rusting.
12. Fold inner and outer wings to the
transport configuration.
13. Move the machine to a storage
position.
14. Select an area that is dry, level, and
free of debris. A location shielded
from ultraviolet radiation is strongly
recommended.
15. Place planks under the jack for added
support if required.
16. Unhook Sprayer from tractor.
Removing from Storage
1. Clear the area of bystanders,
especially small children, and remove
foreign objects from the machine and
working area.
2. Attach the tractor to the Sprayer.
3. Check:
a. Attach and secure all liquid
lines.
b. Tanks and Nozzles.
c. All hardware. Tighten as
required.
d. Tire pressure.
e. All hydraulic lines, fittings,
and connections. Tighten as
required.
4. Lubricate all grease fittings.
5. Replace any defective parts.
6. Add a small amount (20 gallons) of
liquid to the tank. Run the wash circuit
for five minutes and flush the liquid
from the booms.
7. Calibrate the machine .
8. Follow the Pre-Operation Checklist
before using.