Fast 9500 Скачать руководство пользователя страница 31

Страница: 31 / 116

SAFETY

SAFETY

Boom Sprayer 9500 / 9600

Page 31

Use Safety Lights and Devices

Prevent collisions between other road users,

slow moving tractors with attachments or

towed equipment, and self-propelled

machines on public roads. Frequently check

for traffic from the rear, especially in turns,

and use turn signal lights.

Use headlights, flashing warning lights, and

turn signals during both day and night.

Follow local regulations for equipment

lighting and marking. Keep lighting and

marking visible, clean, and in good working

order. Replace or repair lighting and marking

that has been damaged or lost.

Keep Riders Off Machine

Only allow the Operator on the machine.

Keep riders off.

Riders on the machine are subject to injury

such as being struck by foreign objects and

being thrown off of the machine. Riders also

obstruct the Operator’s view resulting in the

machine being operated in an unsafe

manner.

Observe Maximum Transport Speed

CAUTION: Be sure all bystanders are

clear of Sprayer.

IMPORTANT: Transport Sprayer only

with tank EMPTY to prevent Sprayer

damage.

This implement is not equipped with service

or parking brakes. The maximum transport

speed for this implement is 20 MPH (32 KPH)

when the ratio weight of the equipped

implement to the weight of the towing

machine is 1:1 or less. If that ratio is between

1:1 and 2:1, the maximum transport speed is

10 MPH (16 KPH). When that ratio exceeds

2:1, towing is not allowed.

Some tractors are capable of operating at

speeds that exceed the maximum transport

speed of this implement. Regardless of the

maximum speed capability of the tractor

being used to tow this implement, do not

exceed the implement's maximum transport

speed.

Exceeding the implement's maximum

transport speed can result in:

•

Loss

control

the

tractor/implement combination.

•

Reduced or no ability to stop during

braking.

•

Implement tire failure.

•

Damage to the implement structure

or its components.

Содержание 9500





















































































































Результаты поиска

Содержание 9500

Отзывы:

Похожие инструкции для 9500

Бренды по названию

Популярные бренды

Fast 9500, Руководство пользователя

Результаты поиска

Содержание 9500

Отзывы:

Похожие инструкции для 9500

Бренды по названию

Популярные бренды