Fast 9500, Руководство пользователя

Страница: 51 / 116

CONTROLS
CONTROLS Boom Sprayer 9500 / 9600 Page 51
A. Left Boom Tilt Position : This spring-
loaded-to-neutral-center toggle
switch controls the left boom tilt
function. Move the switch up and hold
to raise the tip of the left boom and
down to lower. Release the switch,
the left boom will stop moving and
remain in position. Use this function
to raise the tip of the boom to clear
obstructions.
B. Boom Up/Down : This spring-loaded-
to-neutral-center toggle switch
controls the boom height cylinder.
Move the switch up and hold to raise
the entire boom assembly. Move the
switch down and hold to move it
down. Release the switch, the boom
will stop and remain at that position.
C.
Right Boom Tilt Position
: This
spring-loaded-to-neutral-center
toggle switch controls the right boom
tilt function. Move the switch up and
hold to raise the tip of the right boom
and down to lower. Release the
switch, the right boom will stop
moving and it will remain in position.
Use this function to raise the tip of the
boom to clear obstructions.
D. Main Wing Switch : This spring-
loaded-to-neutral-center toggle
switch controls the field-to-transport
function. Move the switch up and hold
to pivot the outer boom to transport,
and down to field position. Release
the switch, the flip wing will stop and
remain at that position.
IMPORTANT: Extend the cylinder
completely when folding the outer
boom to allow the boom to rotate until
it hits the stop.
E. Flip Wing Switch : This spring-
loaded-to-neutral-center toggle
switch controls the flip wing fold
function. Move the switch up and hold
to fold the flip wing in and down to fold
out. Release the switch, the flip wing
will stop and remain at that position.
F. Model-specific function
a. Swing Wing Switch (9500
120’-132’) : This spring-
loaded-to-neutral-center
toggle switch controls the
swing wing. Move the switch
up to fold the swing wing for
road transport. Move the
switch down to fold out the
swing wing for field position.
b. Hitch Telescope Switch
(9600 80’-100’) : This spring-
loaded-to-neutral-center
toggle switch controls the
telescoping tongue. Move the
switch up to extend the hitch
for road transport before
folding in main wings into
transport position. Move
switch down to retract hitch
after main wings are in field
position.
Chemical Circuit Diagram
The valves in the chemical circuit are used
when filling, washing, rinsing, or operating
the sprayer. Refer to FIELD OPERATION to
determine how the valves should be set.
1. Rinse Tank Fill
2. Main Sump
3. Bottom (Main Tank) Fill
4. Agitation
5. Rinse