Fast 9500 Скачать руководство пользователя страница 62

Страница: 62 / 116

AXLES, TIRES, and TRACKS

AXLES, TIRES, and TRACKS

Boom Sprayer 9500 / 9600

Page 62

Track Wear & Trash Buildup

Avoid grease, oil, or other petroleum chemicals on tracks and wheels. Constant exposure to

petroleum-based chemicals may damage rubber surfaces.

Trash build-up can cause fire from increased friction. Remove trash from trash build-up points (G)

between track and applicator frame.

Inspect for cracking (A), uneven wear (B) and/or chipping or chunking (C) on rubber surfaces of

drive wheels (D), mid-rollers (E) and idler wheels (F).

Remove any embedded rocks, nails, or other sharp object in track belt or mid-rollers.

Undercarriage Inspection and Maintenance

Perform required lubrication. (See

LUBRICATION and MAINTENANCE

section.)

Inspect for loose, damaged, or missing parts. Repair or replace parts before entering the field.

Remove any debris or material buildup on the tops of frame reaction arms. Buildup can

wear down rubber on wheels.

Содержание 9500





















































































































Результаты поиска

Содержание 9500

Отзывы:

Похожие инструкции для 9500

Бренды по названию

Популярные бренды

Fast 9500, Руководство пользователя

Результаты поиска

Содержание 9500

Отзывы:

Похожие инструкции для 9500

Бренды по названию

Популярные бренды