Fast 9500 Скачать руководство пользователя страница 68

Страница: 68 / 116

ATTACHING and DETACHING

ATTACHING and DETACHING

Boom Sprayer 9500 / 9600

Page 68

When storing the machine, keep the safety

chain up off the ground and hook it to the

machine support assembly on the hitch.

Always replace a safety chain if one or more

links or end fittings are broken, stretched, or

otherwise damaged.

Verify all chains for towed implements are

adequately sized for safe transport.

Attach Warning Light Plug

CAUTION: When transporting the

machine on a road or highway at night

or during the day, use warning lights

and devices for adequate warning to

operators of other vehicles. For this

matter, check local governmental

regulations.

Various safety lights and devices are

available from your Fast Ag Solutions dealer.

7-Pin Connector Warning Light Plug

Attach a warning light plug (A) to the tractor’s

outlet socket.

Be sure warning lights, reflectors, and SMV

emblem(s) are clean.

Connect Rate Controller or

Nutrient Applicator System

Wiring

The use of dielectric grease is recommended

on any Raven electrical harness pins before

connection. It displaces moisture on the

contacts and helps prevent corrosion from

forming on pins and sockets which could lead

to erratic function of the auto rate system.

See manufacturer's Manuals for connecting

controller cables to the tractor.

Make Proper Hose Connections

WARNING: Escaping fluid under

pressure can penetrate the skin and

cause serious injury. Avoid the hazard

relieving

pressure

before

disconnecting any hydraulic or other

pressurized

lines.

Tighten

all

connections

before

applying

pressure. Search for leaks with a

piece of cardboard. Protect hands and

body from high-pressure fluids.

If an accident occurs, see a doctor

immediately. Any fluid injected in the skin

must be surgically removed within a few

hours or gangrene may result. Doctors

unfamiliar with this type of injury should

reference a knowledgeable medical source.

Such information is available from Deere &

Company Medical Department in Moline,

Illinois, U.S.A.

IMPORTANT: Hydraulic hoses can fail

due to physical damage, kinks, age,

and exposure. Check hoses regularly.

Replace damaged hoses.

IMPORTANT: All hydraulic couplers

must be clear of debris, dust, and

sand. Use protective caps on fluid

openings until ready to make

connection. Foreign material can

damage the hydraulic system.

Содержание 9500





















































































































Результаты поиска

Содержание 9500

Отзывы:

Похожие инструкции для 9500

Бренды по названию

Популярные бренды

Fast 9500, Руководство пользователя

Результаты поиска

Содержание 9500

Отзывы:

Похожие инструкции для 9500

Бренды по названию

Популярные бренды