Fast 9500 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 116

background image

Foreword to the Owner

Boom Sprayer 9500 / 9600

Page 19

BEFORE DELIVERING THIS MACHINE, your dealer performed a pre-delivery inspection.

THIS  BOOM  SPRAYER  IS  DESIGNED  SOLELY  for  use  in  customary  agricultural  or  similar
operations for the purpose of applying chemical to row crops (“Intended Use”). Use in any other
way  is  considered  as  contrary  to  the  Intended  Use. The  manufacturer  accepts  no  liability  for
damage or injury resulting from this misuse, and these risks must be borne solely by the user.
Compliance  with  and  strict  adherence  to  the  conditions  of  operation,  service,  and  repair  as
specified by the manufacturer also constitute essential elements for the Intended Use.

THIS BOOM SPRAYER SHOULD BE OPERATED, serviced, and repaired only by persons
familiar with all its particular characteristics and acquainted with the relevant safety rules (Accident
Prevention). The Accident Prevention regulations, all other generally recognized regulations on
safety and occupational medicine and the road traffic regulations must be observed at all times.

Any arbitrary modifications carried out on this Boom Sprayer will relieve the manufacturer of all
liability for any resulting damage or injury.

THIS DOCUMENT outlines the specific design and performance requirements for the use of a
Fast Ag Solutions Boom Sprayer assembly. The word “must” in this document indicates a
mandatory requirement. The use of “should” indicates a recommendation of that which is advised
but not required.

WARRANTY is provided as part of Fast Ag Solutions' support program for customers who operate
and maintain their equipment as described in this Manual. The warranty is explained on the
warranty certificate which you should have received from your dealer.

This warranty provides you with assurance that Fast Ag Solutions will back its products where
defects appear within the warranty period. In some circumstances, Fast Ag Solutions also
provides field improvements, often without charge to the customer, even if the product is out of
warranty. Should equipment be abused or modified to change its performance beyond original
factory specifications, the warranty will become void and field improvements may be denied.

TIRE MANUFACTURER'S warranty applicable to your machine may not apply outside U.S.

If you are not the original owner of this machine, it is in your interest to contact your local Fast Ag
Solutions dealer to inform them of this unit's serial number. This will help Fast Ag Solutions notify
you of any issues or product improvements.

«
...
17
18
19
20
21
...
»

Содержание 9500





















































































































Отзывы:

Нет отзывов

Похожие инструкции для 9500

Бренд: KaVo Страницы: 16

Бренд: Quadro Страницы: 11

Бренд: HABYS Страницы: 16

Бренд: York Страницы: 26

Бренд: Pari Страницы: 282

Бренд: Masterclock Страницы: 19

Бренд: Interacoustics Страницы: 25

Бренд: Hamilton Beach Commercial Страницы: 32

GP1313 Schaukel Premium 2.2

Бренд: gartenpirat Страницы: 4

Бренд: Kobelt Страницы: 20

Бренд: Pottinger Страницы: 39

Бренд: WAGNER Страницы: 20

Бренд: AMVAC Страницы: 81

Бренд: Topcon Страницы: 76

Бренд: Thoratec Страницы: 8

Бренд: ADJ Страницы: 6

Бренд: BERRIDGE Страницы: 11

Бренд: Helmer Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды