Fast 9500 Скачать руководство пользователя страница 10

Страница: 10 / 116

Table of Contents

Boom Sprayer 9500 / 9600

Page 10

Limited Warranty

Fast Ag Solutions warrants to the buyer that the new machinery is free from defects in material

and workmanship.

This warranty is only effective as to any new machinery which has not been altered, changed,

repaired or treated since its delivery to the buyer, other than by Fast Ag Solutions or its authorized

dealers or employees, and does not apply to accessories, attachments, tools or parts, sold or

operated with the new machinery, if they have not been manufactured by Fast Ag Solutions.

Fast Ag Solutions shall only be liable for defects in the materials or workmanship attributable to

faulty material or bad workmanship that can be proved by the buyer, and specifically excludes

liability for repairs arising as a result of normal wear and tear of the new machinery or in any other

manner whatsoever, and without limiting the generality of the foregoing, excludes application or

installation of parts not completed in accordance with this Operator’s Manual, specifications, or

printed instructions.

Written notice shall be given by registered mail, to the Manufacturer within seven (7) days after

the defect shall have become apparent or the repairs shall have become necessary, addressed

as follows:

Fast Ag Solutions

4130 Commerce Boulevard

Windom, MN 56101

This warranty shall expire one (1) year after the date of delivery of the new machinery.

If these conditions are fulfilled, Fast Ag Solutions shall at its own cost and at its own option either

repair or replace any defective parts provided that the buyer shall be responsible for all expenses

incurred as a result of repairs, labor, parts, transportation or any other work, unless Fast Ag

Solutions has authorized such expenses in advance.

The warranty shall not extend to any repairs, changes, alterations, or replacements made to the

new equipment other than by Fast Ag Solutions or its authorized dealers or employees.

This warranty extends only to the original owner of the new equipment.

Rubber parts (including tires, hoses, grommets) are not warranted.

This warranty is limited to the terms stated herein and is in lieu of any other warranties whether

express or implied, and without limiting the generality of the foregoing, excluded all warranties,

express or implied or conditions whether statutory or otherwise as to quality and fitness for any

purpose of the new equipment. The Manufacturer disclaims all liability for incidental or

consequential damages.

This Boom Sprayer is subject to design changes and Fast Ag Solutions shall not be required to

retrofit or exchange items on previously sold units except at its own option.

Warranty void if not registered.

Содержание 9500





















































































































Результаты поиска

Содержание 9500

Отзывы:

Похожие инструкции для 9500

Бренды по названию

Популярные бренды

Fast 9500, Руководство пользователя

Результаты поиска

Содержание 9500

Отзывы:

Похожие инструкции для 9500

Бренды по названию

Популярные бренды