The app menu <Settings>
Doc. no. BA012498_03
90 / 112
GB
range. This is because if you accidentally reduce the radio range too far, you
will need to move into even closer proximity to re-establish the connection
and correct the radio range.
Range reduction does not always restrict the connection to the
room in which the Light Control Box is located: Persons in the
room directly above may sometimes also be able to establish a
radio connection to the Light Control Box.
Adjusting the radio range:
Position yourself at the distance from the Light Control Box to which
you wish to restrict the radio connection and then move approximately
one metre further away from the Light Control Box.
Move the slide controller to the left in stages.
After each movement of the slide controller, send commands to the
Light Control Box to check whether a connection to the Light Control
Box still exists.
If the connection is interrupted, move to the desired distance and
check whether the Light Control Box and the Bluetooth device can
connect. To do this, you can switch to the device registration screen
and use the <
> button.
If a connection is not made, move closer until the app can re-estab-
lish the connection.
When the connection to the Light Control Box is re-established,
increase the radio range slightly by moving the slide controller to the
right.
Move back to the desired distance and check whether the Light
Control Box and the Bluetooth device can connect. If this is not the
case, repeat the two steps above until connection is successful at the
desired distance.
The radio range is now adjusted.
13.1.3 Adjusting automatic mode
You can operate the Light Control Box in
fully automatic
and
semi-automatic
mode.
Note the start-
ing position
