The remote control menu <Programming>
Doc. no. BA012498_03
64 / 112
GB
SymbiLogic™ is deactivated when a scene is accessed.
Prerequisites:
• Date and time are set in the menu item <Calendar> (see page 69).
• The target brightness is set to a realistic value, for example 500 lux.
See “Light set value” page 56.
Activating SymbiLogic™:
1. Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <SymbiLogic> and
confirm the selection with the
button.
4. Select the
or
button to choose the location with the lighting
conditions that the Light Control Box should replicate. Confirm the
selection with the
button.
SymbiLogic™ is active.
8.5 Channel Map
This function enables you to assign a different channel number to a light.
The new channel number must not be assigned to a different light. The
remote control helps you to re-sort the channel numbers by preventing any
invalid assignments.
What if you want to use multiple Light Control Boxes? Execute the
Channel Map function before you connect the Light Control Boxes
via DALI.
Assigning a new channel to a light:
1. Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <Channel map>, and
confirm the selection with the
button.
4. Press the
button again.
5. Assign the required channel number to the first channel. To do this,
SymbiLogic™
and scenes
