The app menu <Manual>
Doc. no. BA012498_03
84 / 112
GB
Setting the brightness and colour temperature for all channels:
Deactivate individual control (
).
Slide the brightness slide controller in the required direction.
The brightness changes on all channels.
Slide the colour temperature slide controller in the required direction.
The colour temperature changes on all channels.
All channels produce the same brightness and colour tempera-
ture.
11.3 Back to normal operation mode
Below the channel control, you will see the heading Normal operation
mode. If you actuate the button <Back to normal operation mode> below
this, the temporary settings you have made will be deleted. The Light Con-
trol Box switches back to normal operation mode and uses the programmed
settings.
11.4 Switching the switching channels on and off
You can also turn the switching channels on and off temporarily in the
menu.
Switching channels control DALI switch devices that are connected to the
C1 and C2 DALI interfaces of the Light Control Box. Non-DALI-compatible
devices can be connected to the DALI switch devices. For example, you can
use the switching channel to switch on non-DALI-compatible blackboard
lighting in a classroom. Light Control Boxes are factory configured to ena-
ble them to send commands to connected DALI switches via the switching
channels.
DALI switch devices are available as accessories including SW DALI Full
Automation (item no. EP10427473) and SW DALI Semi Automation (item
no. EP10427480).
Switching chan-
nel and DALI
switch
