The remote control menu <Programming>
Doc. no. BA012498_03
55 / 112
GB
• Light Control Boxes capture the current light value using the connect-
ed DALI presence detector.
• Lights with an integrated light sensor send the current light value of
their channel to the Light Control Box.
If a channel does not have a sensor because only one light with-
out a light sensor is working on the channel, the value of the DALI
presence detector is used for this channel.
The required reference value must be set manually before storing the
brightness. This is performed in the Functions menu.
Setting the reference values for the read-in function:
1. Press the
button to activate programming mode.
The Light Control Box switches to programming mode and the
lights produce maximum brightness.
2. Select the <Functions> main menu and confirm the selection with the
button.
3. Select a lighting channel, for example <Channel 1>, and confirm the
selection with the
button.
4. Select the
button to choose the menu item <Luminous efficien-
cy> and confirm the selection with the
button.
5. Enter the percentage value of the maximum luminous efficiency by
pressing the
or
buttons. Confirm your selection with the
button.
The illumination level changes according to your input.
6. If there are lights in the room working on channel 2: Select channel 2
and repeat steps 4 and 5 for this channel.
The desired brightness is set and can be read in.
7. Press the
button to return to the main menu for the other set-
tings.
Adopting the reference value with the read-in function:
1. Select <Programming> from the main menu and confirm the selection
with the
button.
2. Select the
button to choose the menu item <All Channels> and
confirm the selection with the
button.
Set reference
value
