The remote control menu <Programming>
Doc. no. BA012498_03
68 / 112
GB
es such as automatic stairwell timers or current impulse relays on with
an impulse. The impulse is repeated regularly for as long as movement is
detected
Setting the mode for DALI switch 1 or 2:
1. Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <DALI switch> and
confirm the selection with the
button.
4. Select the
button to choose the menu item <DS1 mode> or <DS2
mode> and confirm the selection with the
button.
5. Select the
or
button to choose the desired mode and confirm
the selection with the
button.
6. End programming mode by pressing the
button.
The selected DALI switch now operates in the set mode.
8.8 Scene editor
In the <Scene editor> menu item, you can enter and save the brightness for
a light scene as a percentage as well as the colour temperature in kelvin.
You can also set whether a DALI switch should be switched on or off with
the scene.
Setting a scene:
The change is made using an example from scene 3 on channel 2.
1. Select the <Programming> menu item and confirm the selection with
the
button.
2. Select the
button to choose the menu item <Scene editor> and
confirm the selection with the
button.
The submenu shows a matrix with the default light values for
each channel and scene. You can customise these values.
3. In the matrix, use the
button to navigate to column <Sc3> and
the
button to navigate to row <C2 %>. Confirm your selection
with the
button.
Sc1 Sc2 Sc3 Sc4
CH1 % 10 100
28
70
CH2 % 10 100 30 70
CH1 K 65 50 40 29
CH2 K
65 50 63 29
DS1
Off On Off On
DS2
Off On Off On
Bat ok LS
ELCTW
