The <Functions> remote control menu
Doc. no. BA012498_03
44 / 112
GB
Calendar
Years
Months
Days
Hours
Minutes
Seconds
Factory reset
Reset editor
Sensitivity
Detector LEDs On
Detector LEDs Off
Light value on
Light value off
Detector Fact. reset
Detector Light Factor
Table 2: “Programming” menu with sub-menus
7
The <Functions> remote control menu
Settings made in the <Functions> menu item are executed temporarily but
not stored as a new basic setting. When settings are made in this menu, the
Light Control Box is therefore in override mode.
In the <Functions> menu, there are three settings that are not temporary
but are stored permanently:
• Changes of the colour temperature
• Scene changes via the <Store scenes> command
• Activate/deactivate the KNX programming mode
7.1 Channels 1 and 2
The sub-menu items for <Channel 1> and <Channel 2> are identical. For
each lighting channel, the following functions are possible in the sub-men-
us:
7.1.1 On/Off
The lighting for each channel is temporarily switched on or off using the
<On> and <Off> menu items.
Switching a channel on:
1. Select the <Functions> menu item and confirm the selection with the
Exceptions:
Permanent
settings
Channel 1
On
Off
Dim start
Dim stop
Light value
CCT Value
Bat ok LS
ELCTW
