Settings via DALI button
Doc. no. BA012498_03
107 / 112
GB
Changes in the colour temperature are always saved and are also
used in normal operation mode.
15 Settings via DALI button
All Light Control Boxes can be controlled via external DALI buttons. The
DALI button is an external module that sends standard 16-bit commands
(IEC 62386-102:2009).
For example, you can switch on and dim the lighting using the DALI button.
It is also possible to activate scenes using a DALI scene module. Chapter
15.1 on page 107 contains a list of the possible DALI commands.
The Esylux DALI push button 8x DALI TW (item number EC10430930)
is configured accordingly by default. This allows you to send the following
commands without an additional scene module:
• Lighting on/off
• Dim brightness
• Adjust colour temperature
• SymbiLogic on
• Scene 1-4 on
The DALI button commands are sent to all lights via DALI and ELC bus.
15.1 List of DALI commands
DALI commands (16 bits) Address
Description
UP
Broadcast
All lighting channels adjust the
brightness upwards. No command
to DALI switches.
UP
Group 15
All switched-on lighting channels
adjust the colour temperature
upwards. No command to DALI
switches.
UP
Group 0
Channel 1 adjusts the brightness
upwards. No command to other
lighting channels or DALI switch-
es.
UP
Group 1
Channel 2 adjusts the brightness
upwards. No command to other
lighting channels or DALI switch-
es.
DOWN
Broadcast
All lighting channels dim the
brightness. No command to DALI
switches.
