The remote control menu <Programming>
Doc. no. BA012498_03
59 / 112
GB
the maximum brightness and confirm the selection with the
but-
ton.
6. End programming mode by pressing the
button.
The brightness for the orientation light is now set.
8.3.6 Orient. time mode
The menu item <Orient. time mode> specifies whether the duration for the
orientation light is set in minutes or with a fixed start and end time. The
following applies:
• If you enable the setting <in minutes>, the settings in the menu item
<Orient. light from h> and <Orient. light to h> are disabled.
• If the you enable the setting <From h to h>, the setting in the menu
item <Orient. light in min.> is disabled.
Activating minutes mode:
1. Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <All Channels> and
confirm the selection with the
button.
4. Select the <Orient. time mode> menu item and confirm your selection
with the
button.
5. Confirm the menu item <in minutes> with the
button.
6. End programming mode by pressing the
button.
The duration of the orientation light can now be set in the menu
item <Orient. min.>.
For more information on entering the desired number of minutes, see the
Section “Orient. light in min.” page 60 below
Activating time mode:
1. Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <All Channels> and
confirm the selection with the
button.
Mode duration
Duration in
minutes
Duration
according to
times
