The remote control menu <Programming>
Doc. no. BA012498_03
56 / 112
GB
3. Select the <Store brightness> menu item and confirm the selection
with the
button.
4. Close programming mode with the
button.
The reference value is now saved.
8.3.2 Light set value
The light set value is the target brightness value and acts as the threshold
value for the lighting control. If the ambient light level is below the target
brightness, the Light Control Box controls the illumination level when pres-
ence is detected. So, if the daylight exceeds the value, the Light Control
Box automatically switches off the light.
The light set value function specifies the brightness in lux for all lighting
channels in a room. You can send the desired or measured lux values to the
Light Control Box by remote control.
This process gives the best results for lights with a calibrated
light sensor.
Setting the light target value:
1. Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <All Channels> and
confirm the selection with the
button.
4. Select the <Light set value> menu item and confirm the selection
with the
button.
5. Use the
or
buttons to set the required lux value and confirm
the selection with the
button.
6. End programming mode by pressing the
button.
The light set value is set.
If you wish to assign different target values to the channels, you
need to use the
Store brightness function
. For information, please
see Chapter “Store brightness” page 54.
