Overview of operating modes
Doc. no. BA012498_03
37 / 112
GB
Energy-saving mode
Action in
energy-saving mode
• Deactivates the lighting.
Trigger for energy-sav-
ing
mode
• Expiry of the orientation light time.
Duration
• When
fully automatic
is activated:
Until presence is detected or the ambient
brightness falls below the set value.
• When
semi-automatic
is activated:
Until normal operation mode is started via
the button or remote control.
Subsequent operating
mode
• Normal operation mode or override mode.
5.2 Manually triggered operating modes
Other than these operating modes that the Light Control Box can automat-
ically switch between, there are other operating modes that are triggered
manually or by certain events:
Override mode
Action
• Illumination that differs from normal oper-
ation mode owing to manual interventions
such as changes to brightness or activation
of light scenes. Manual changes are tem-
porary and are not stored.
Note: Off delay time settings for normal
operation mode also apply to override
mode.
Trigger for
override mode
• Command via the button, remote control or
app during normal operation.
• Motion detection during the off warning
time if override mode was active before the
off warning.
Duration
• For such time that motion is detected,
plus the set off delay time.
Subsequent operating
mode
• Off warning mode, as after normal opera-
tion mode.
