The remote control menu <Programming>
Doc. no. BA012498_03
58 / 112
GB
60 seconds. During this time, the lighting uses the brightness that is set
for the orientation light. If presence is detected during this time, the Light
Control Box returns to override mode.
Setting the off warning:
1. Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <All Channels> and
confirm the selection with the
button.
4. Select the <Off warning> menu item and confirm the selection with
the
button.
5. Use the
or
buttons to set the required duration and confirm
the selection with the
button.
6. End programming mode by pressing the
button.
The switch-off warning time is now set.
8.3.5 Orientation light
The
Orientation light
function provides subtle lighting. You can also set the
brightness of the orientation light to values between 10% and 50% of the
maximum illumination level. You can also set for how long or from when you
want the orientation light to remain active.
The orientation light only switches on once the set off delay time or a set off
warning time have elapsed. The orientation light duration can also be set to
zero minutes.
Setting the orientation light brightness:
1. Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <All Channels> and
confirm the selection with the
button.
4. Select the
button to choose the menu item <Orientation light>
and confirm the selection with the
button.
5. Use the
or
buttons to set the brightness as a percentage of
Prerequisites
Brightness
