The remote control menu <Programming>
Doc. no. BA012498_03
62 / 112
GB
to start, the Light Control Box switches to energy-saving mode
without illumination. The time-controlled orientation light is then
not activated.
If you want to be sure that the orientation light remains lit over-
night, set the start time to a time when movement will still be
detected. After the off delay time has elapsed, the light then
switches to orientation light mode.
8.3.9 Fully automatic
Behaviour of the Light Control Box when
Fully automatic
is enabled:
The lighting automatically switches on if
• The ambient light is below the set target brightness
and
• the detector detects presence.
The lighting automatically switches off if
• the ambient light is brighter than the set target brightness
or:
• no movement is detected
and
• the set off delay time has elapsed.
Activating fully automatic:
1. Select the <Programming> menu item and confirm the selection with
the
button.
2. Enable programming mode by pressing the
button.
3. Select the
button to choose the menu item <All Channels> and
confirm the selection with the
button.
4. Select the
button to choose the menu item <Fully automatic>, for
example, and confirm the selection with the
button.
5. End programming mode by pressing the
button.
Fully automatic mode is now active.
8.3.10 Semi-automatic
If the
Semi-automatic
function is active, the lighting can only be activated
via an external button. The lighting automatically switches off if the detec-
