The app menu <Settings>
Doc. no. BA012498_03
99 / 112
GB
Setting the light target value in lux:
Move the slide controller until the required lux value is shown in the
number field.
Tap <Save> to save the setting.
The light set value is set.
Repeat the calibration and setting process for the remaining
channels.
13.2.3 Manual settings
Prerequisites:
• The ambient light is below the required brightness at the time of
setting.
Manual settings can be made for lights with and without light sensors. If
lights with light sensors are connected to the Light Control Box, ESYLUX
recommends making settings after calibration.
To set the light target value manually, use the slide controller to set the
light value to the required value. The set brightness is then saved as the
light target value. No lux value is entered when setting manually. However,
you can use a lux meter to check the set brightness.
