Esko Kongsberg C series, Руководство пользователя

Страница: 191 / 268

18
Kongsberg C-series
Carriage Beam at Lower Base Crushing Hazard
The carriage beam lowers until the plunger
sensor detects the top board on the stack.
In normal operation when the suction cups
touch the top board, or the top of the pallet,
there is in excess of 100 mm between the
carriage beam end plate and the gantry base.
However there may be unusual circumstances
(no pallet, no plunger sensor) where the
carriage beam can be lowered into a position
where there is less than 100 mm clearance
between the beam end and the gantry base.
Therefore, never reach into this area with your
hand or other body part as there is a danger
of crushing.
Gantry Lower Base Top Cover Support Roller Rolling Nip Danger
There is a small plastic roller on each side of
the lower gantry.
These rollers act to support the lower gantry
upper cover as the gantry moves forward and
reverse.
These rollers create a rolling nip danger. Never
reach between the top cover and the base
frame.
The yellow/black warning tape serves as
additional warning indication for this potential
danger.
191