Esko Kongsberg C series, Руководство пользователя

Страница: 230 / 268

19
Kongsberg C-series
The Fault Reset pushbutton is a blue lighted pushbutton.
The Fault Reset button will flash whenever the system is in a faulted
condition.
A faulted condition means the safety circuit is de-energized and the
sytem is in a safe condition.
Neither the feeder or stacker will not operate in any mode when the
safety circuit is de-energized as indicated by the flashing blue light.
Pressing the Fault Reset button will cause the safety circuit to be reset, providing there are no
active machine faults.
The blue light will stop flashing when the safety circuit is reset
6 - Tapeswitch Bypass Pushbutton
There may be occasions where a safety bumper is pressed and cannot be released due to a
mechanical jam.
The safety system cannot be reset when a safety bumper is pressed.
The Tapeswitch Bypass pushbutton allows the safety bumper system
to be bypassed to allow either the feeder or stacker to be jogged out
of the mechanical jam situation.
The Tapeswitch bypass feature is only operational while a safety
bumper is pressed.
During a bumper actuated jam, pressing the Tapeswitch Bypass
pushbutton will cause the safety bumper system to be bypassed for a
period of 30 seconds.
This bypass allows the operator to reset the safety circuit and jog the feeder or stacker out of
the jammed condition.
The Tapeswitch Bypass Pushbutton is located on the feeder electrical enclosure door.
19.7. Feeder Sequence of Operation
230