Esko Kongsberg C series, Руководство пользователя

Страница: 149 / 268

12
Kongsberg C-series
Plunger
The tool is equipped with a plunger that serves
two purposes:
1. To force the spheres into the internal funnel.
2. Indicate the number of spheres remaining
in the tool. If the groove is no longer visible
it means that there is a limited number of
spheres left in the tool.
Braille Tool milling bit
The supplied milling bit is heavily unbalanced
and should not be run faster than 20.000 RPM
to avoid excessive wear to the milling spindle!
This also means that you should not use this
bit when warming up the milling spindle as
the warm up sequence exceeds 20.000rpm.
Braille Tool setup
In order to create high quality consistent braille patterns you should perform Tool Height and
Tool Offset calibrations.
Before adjusting offset you should set the tool height of the Braille Tool . This can be done
manually or automatically using X-Pad .
Note: It is crucial that the Tool Height is correctly set before running this tool.
The nominal value is Tool Height = Material Thickness .
Meaning, if the material is 6 mm thick, the nominal height setting should be -6 mm (minus 6
mm).
Tool Offset adjustment
Machine Connection -> Tool Configuration
1 Load the Braille Tool with black spheres.
149