Esko Kongsberg C series, Руководство пользователя

Страница: 179 / 268

17
Kongsberg C-series
There is one switch on the left top-side of the TakeUp Unit .
This switch switches the machine on and off.
The emergency stop on the top of both sides of the
TakeUp Unit can be used to stop the
machine immediately.
The dancer roller controls the turning direction of the
TakeUp Unit .
When there is new media provided to the TakeUp Unit by for example a cutting table, the
dancer roller will follow the media and lowers in the machine.
When the dancer roller lowers in the
TakeUp Unit , the machine will start winding the material
till the dancer roller rises to his neutral zone.
Winding shaft
The
TakeUp Unit
is equipped with a Autogrip shaft, which is driven on the left side of the
machine.
This autogrip shaft has a variable winding speed depending on the height of the dancer roller.
Machine Identification
The TakeUp Unit has an identification label, a typical label is shown in the picture.
The identification label is positioned on the left side of the machine, where the power cable is
entering the machine.
17.3. Safety
General
The TakeUp Unit has safety equipment to promote safe machine operation, see next chapter.
You must, however, take note of the following:
Make sure that clothing, long hair etc. are not caught by rotating rollers, which would involve
the risk of being trapped.
Emergency stop button:
The Emergency Stop buttons are positioned on top of the safety covers at the TakeUp Unit .
Press the Emergency Stop button to stop all rotating parts at once.
179