Esko Kongsberg C series, Руководство пользователя

Страница: 116 / 268

12
Kongsberg C-series
U = Milling Underlay
The Table Top Reference function is carried
out on top of the Milling Underlay
The
Tool Height
is measured automatically.
If, after a test cut, you want to modify the Milling Depth , this is possible from the Tool Height
Adjustment dialog.
The following rules apply when Milling:
Mill on Cutting Underlay (C):
To avoid damage to the Cutting Underlay ,
the downward movement of the drill-bit is
stopped 2 mm / 0.08 inch above the cutting
underlay.
Thus, it is not possible to mill through the
material in this case.
Tool Height will follow the mapped tabletop.
Milling Underlay (U) on top of the Cutting
Underlay :
To be able to mill through the material, the
thickness of the Milling Underlay must be > 2
mm / 0.08 inch.
Tool Height will follow the mapped tabletop.
12.8.14. Miscellaneous
Warm Up
Machine Panel Toolbar -> Warm Up
To protect the Spindle , mandatory Warm Up is implemented.
If the
Spindle
has been inactive for 8 hours or more, a 3 min.
Warm Up
is required.
If the Spindle has been inactive for 4 weeks or more, an extended sequence is required, called
Run In .
116