Ericsson AVP 4000 Скачать руководство пользователя страница 90

Страница: 90 / 422

Getting Started

3-54

1/1553-FGC 101 1790 Uen Y

3.7.21

How to Copy and Move Transport Streams and Services

To copy or move a previously created Transport Stream or service, or an existing

component from one output to the other, proceed as follows:
1. Select the Transport Stream, service or component.

Note:

More items can be highlighted by holding down the

Ctrl

Shift

key while

clicking.

2. To move the selected items, drag them over another valid dropping location and

release the mouse button. For Transport Streams, valid dropping positions are

the outputs, for services, the Transport Streams and for components, the

services.

3. To copy the item instead of moving, hold the

Ctrl

key while dragging. The item is

moved or copied to the specified location.

The commands in the

Edit

menu of the

Properties

widget can also be used for

copying or moving items. To use these, proceed as follows:
1. Highlight the item or items you want to copy or move, and then choose

Edit >

Copy

Edit > Cut

2. Then, highlight the location where you want to paste the items. Select

Paste

from the

Edit

menu. The items will be copied or moved to the new location.

3. There is also an option to create an identical mirror of an existing Transport

Stream such that any changes made to the original Transport Stream are

automatically applied to the mirrored Transport Stream. To create a mirrored

Transport Stream highlight the Transport Stream to be copied, chose

Edit >

Copy

, highlight the output where the mirrored TS is to be applied to and chose

Edit > Paste as Mirror

4. To save your changes, click the

Apply All

button located at the right side of the

user interface below the page tabs.

Note:

A component can be included in more than one Transport Stream as an

instance of an input component. Therefore, any change to it, be it automatic

by the bit rate tracking algorithm or manually applied by the user, is

reflected in all instances.

3.7.22

How to Configure MGP

3.7.22.1

Overview of MGP

The Multicast Guard Protocol (MGP) is a mechanism used to control the emission of

multicasts containing media streams over IP, where multiple AVP units can emit the

same multicast onto the same network. This mechanism ensures only one AVP unit

in such a group will emit. In a system deployment, this permits controlling software

to not have to configure downstream switches to prevent duplication of the same

multicast onto the same network.

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 90 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: