Ericsson AVP 4000 Скачать руководство пользователя страница 150

Страница: 150 / 422

Front Panel Control

4-10

1/1553-FGC 101 1790 Uen Y

Export All Configurations

Exports all the configurations stored on the unit to a USB stick.

Select Configurations to

Export

Export Selected

Configurations

Exports the selected configurations and stores them on the USB stick attached to the front panel.

Device Config <n>:

<name>

The list of configurations stored on the USB stick. The configurations to be exported can be selected

by pressing the Select button on the keypad.

Device Config <n>: <name>

Exports one particular configuration to USB stick.

1 Visible only when a USB drive is detected

4.4.1.2

A/V Encoder Menu

The A/V Encoder Menu displays the VCM specific audio/video encoder settings. The

menu options are shown in

Table 4.5.

Table 4.5 A/V Encoder Menu

A/V Encoder

Video Input Locked

Yes, No. Read only parameter. Indicates whether a video lock is achieved for the SDI streams. For internal

streams, its value is always Yes.

Video Bit Rate

Bit Rate of the video component encoded by the encoder card.

Video Profile

The video profile and level to use for encoding the source.

Buffer Mode

CBR, Seamless, Fast Channel Zap, Capped VBR..

Source

SDI, Bars, Black, Moving Object, Slate

. External SDI source or internal source to be encoded.

Audio Monitor

Displays the levels for the channels associated with audio modules on the VCM card. To select between the

audio modules, turn the rotary knob.

Audio Module <n>

For a full list of the menu items in the Audio Module <n> menu.

4.4.1.3

Output Menu

The Output Menu is used for building a Transport Stream on a specific output. The

menu options are shown in

Table 4.6.

Table 4.6 Output Menu

Output

IP Output <n>

The IP output is either a physical interface or a bond of physical interfaces.

Data Interface Group <m>

Selects interface group <m> to modify its parameters.

Network Mode

Same-Network, Different-Network. If set to Different-Network, the

two ports in the group can belong to different subnets. In Different-

Network mode only the Active-Active Redundancy mode is

supported.

IP Redundancy Mode

Active-Active, Active-Standby. Describes the behavior of the spare

interfaces. Currently, data output pairs that make up the data

interface group are mirrored outputs.

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 150 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: