Ericsson AVP 4000 Скачать руководство пользователя страница 131

Страница: 131 / 422

Getting Started

1/1553-FGC 101 1790 Uen Y

3-95

UHD 2160p50 Quad.

d UHD 2160p59.94 Quad.

Note:

It is possible to set

Input Detection

Auto Detect and Configure

if using

the Interleaved format.

7. Click on the

Encode

tab.

8. Set the

Profile

UHD HEVC Main 10 Profile Level 5.1 High Tier 4:2:0 10 bit

Note:

For 4:2:2 video encoding a license must be purchased and the

Profile

set to

UHD HEVC Main 10 Profile Level 5.1 High Tier 4:2:2 10 bit

9. Set the

Buffer Mode

to either

CBR, Low Delay

Mega Low Delay

depending

on the picture quality and end to end delay required. See section

3.10

for more

details.

10. Set the

Video Bitrate

to the required value

depending on the bandwidth

available and picture quality required

. See section

3.10

for more details and

recommendations.

3.13

How to Return to Default Settings from the GUI

All settings are retained through a power cycle. If the unit seems to be behaving

strangely or you just want to erase all settings then the default settings can be

restored. To restore the default settings navigate to

Support > General > Clear

Device Configuration

and select the

Reset Configuration

button. The

configuration will be reset and the device will reboot.

3.14

Digital Programme Insertion (DPI)

Splicing is used to insert a Digital Programme (e.g. advertisements) into an MPEG-2

Transport Stream. DPI is available when the DPI license is purchased. One license

is required for each video component.

The AVP 4000 supports DPI from splice point insertion controlled from:

•

SCTE104 messages in VANC.

•

SCTE104 messages from the control IP input.

•

SCTE35 messages from the TS input when using transcode operation on the

EI9001T card.

3.14.1

Splice Point Operation

The VCM is capable of storing up to 10 splice events, which can be inserted up to

13 hours before the event is due. If splicing is disabled all stored pending splice

events will be deleted.

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 131 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: