Ericsson AVP 4000 Скачать руководство пользователя страница 88

Страница: 88 / 422

Getting Started

3-52

1/1553-FGC 101 1790 Uen Y

4. Set in the intended quality in the

Target Quality

field. Currently, this value is not

observed by the video encoding module, and it is for future purposes only.

3.7.19

How to Configure the Front Panel Video Confidence Monitor

The confidence monitor on the front panel can be configured to monitor the video

input on any VCM fitted to the chassis, from either the GUI or the front panel.

To configure the confidence monitor, proceed as follows:
1. From the GUI go to

Device Configuration > Advanced Setup > Base Unit >

Front Panel Parameters > Video Monitor Setup > Video Monitor Video Select

The Properties panel will provide a drop down box listing all available sources with

the relevant slot number (in many cases this will be only a single VCM).

2. Select the required source.

There is a preview time for the confidence monitor that sets the time the monitor

display is active from the time the

button is pressed. This is to help maximize the

life of the monitor. If a longer preview time is required, proceed as follows:
1. From the GUI go to

Device Configuration > Advanced Setup > Base Unit >

Front Panel Parameters

and set the

Video Monitor Preview Time

to the

required value (in seconds).

2. From the front panel navigate to

Unit Config > Display Setup > Video Monitor

Input

and select the required source.

3.7.20

How to Configure VLAN Tagging

VLAN tagging can be used to segregate IP packets from data interfaces.

VLAN Creation

A VLAN is created by specifying the VLAN ID, IP address and the Netmask. All

Transport Streams which are tagged to this VLAN use the VLAN IP address as its

source IP address. Hence the VLAN and VLAN ID must be created before it can be

used to tag a Transport Stream.

To create VLANs, navigate to

Device Configuration > Advanced Setup >

Encoder > Vlan Tags

and select the output you want to assign the VLAN tag to,

and click

Add

in the

Properties

pane. Alternatively, on the front panel navigate to

Advanced/System/Vlan Tags

and set up the VLANs as required. The available

options are listed in the following table.

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 88 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: