Ericsson AVP 4000 Скачать руководство пользователя страница 163

Страница: 163 / 422

Front Panel Control

1/1553-FGC 101 1790 Uen Y

4-23

MGP Mode

Off, Module Level, Unit Level. Determines if MGP is enabled or not, or if it is enabled,

then the unit is controlled as a whole or on a module level basis.

Transmission Interval

Period for steady-state transmission of MSM packets in units of ms.

R0 Playout Period

Duration of the MSM burst emitted on entering MGP state R0 in units of ms.

S1 Playout Period

Duration of the MSM burst emitted on entering MGP state S1 in units of ms.

Control Contact Timeout

Period of time in ms the system waits before assuming loss of contact with the control

system after the control link goes down.

MSM Destination Port

UDP port for sending MGP packets.

MGP Settings

Only available when MGP is enabled

MSM Multicast Address

The destination IP Address of the MSM packets.

MGP State

The current state of the MGP implementation.

MGP Spares

Only available when MGP is enabled.

Spare Device Configuration

Selects a spare device to set up its parameters.

Spare IP Address

The IP address of another unit that is acting as a spare for this unit/service.

Vlan Tags

Output <n>: Data Port <m> - Data

Port <k>

Selects output <n> for adjusting its VLAN settings.

Add Vlan tag

Adds a new VLAN tag to the current output.

Vlan ID: <id>

The ID associated with the VLAN tag. Allows the user to change the ID.

Vlan ID (Create)

Modifies the VLAN ID for the current tag.

Vlan IP

Assigns an IP address to the VLAN.

Vlan Netmask

Specifies the network mask for the current VLAN.

Vlan Gateway

Specifies the gateway address for the current VLAN.

Vlan Priority

Specifies the gateway priority for the current VLAN. 1-7.

SNMP

System Contact

Contact to the team providing support for this unit.

System Name

The name to identify the current unit.

System Location

The location where the current unit is installed.

Will this unit be SNMP Polled

True, False. Determines whether the unit is polled for SNMP information or not.

Time Elapsed before Control

assumed Lost

The amount of time between sysUpTime requests before the connection with the

control system is assumed to be down.

Currently in Contact with Control

System

Determines if a connection has been established with the trap server. True/False.

SNMP Agent Ready

Determines if the SNMP agent is ready. True/False.

SNMP Trap Server

Configures the Trap Server destinations.

Accept Configuration

Accepts the changes in hardware configuration if there are any.

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 163 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: