Ericsson AVP 4000 Скачать руководство пользователя страница 136

Страница: 136 / 422

Getting Started

3-100

1/1553-FGC 101 1790 Uen Y

To get and upload additional licenses, proceed as follows.

3.16.2

Video Licenses

All licenses for the EI9001 and EI9001T option cards are stored on the host card (on

the chassis). Therefore, if the same chassis is used and the EI9001/T cards

replaced, the licenses are still applicable.

The video licenses AVP/SWO/MP2 and AVP/SWO/MP4 are required to be able to

configure the profile parameter of the video encoder. Under certain user

configurations, the error message shown in

Figure 3.80

may be displayed.

Figure 3.80 Video License Error Message

This message indicates that at least one of the encoder cards is configured (either

by default settings or manual configuration) to try to obtain a license that is not

available. This can be due to the following:

•

No MPEG-2 or MPEG-4 AVC licenses are loaded on the unit (have not been

purchased).

•

All available licenses for that mode have already been allocated to other

encoder cards fitted in the chassis.

To resolve these issues the required quantity of AVP/SWO/MP2 or AVP/SWO/MP4

licenses needs to be available to match the number of cards fitted in the chassis.

This message can be acknowledged and the encoder card should be re-configured

to a different coding mode (if a license is available). If no further AVP/SWO/MP2 or

AVP/SWO/MP4 licenses are available they should be purchased as necessary.

3.16.3

Ordering Additional Licenses

When ordering additional licenses for existing units the following information is

needed:

•

Unique Chip ID

of the unit to enable licenses stored on the base chassis. To

retrieve the Chip ID, go to

Support > Versions

and in the

Modules

widget of

the

General

tab click on the

Host

tab.

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 136 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: