Ericsson AVP 4000 Скачать руководство пользователя страница 174

Страница: 174 / 422

Front Panel Control

4-34

1/1553-FGC 101 1790 Uen Y

Received Reflex Msg

Device Rx Counter

Device Tx Counter

Socket Rx Counter

Socket Tx Counter

PCR Excg Rx Counter

PCR Excg Tx Counter

Set Rate Src IP Addr

PCR Exchange Src IP Addr

SCR diff to be applied to

ClocksFPGA

Second Video

PIP

Audio Module

Advanced

AC-3 PMT / Descriptor Syntax

Audio <n>

Input

Format

Uncompressed (LPCM), MPEG Layer II, Dolby Digital, Dolby Digital Plus,

Dolby E, AAC. Sets the input format used by the audio encoder.

Source

Off, Mute, Test Tone, Embedded 1 to 8. Sets the source used by the audio

encoder. No input is fed to the encoder if Off is selected. Mute mutes the

incoming audio and encodes silence. Test Tone encodes an 1 kHz test tone,

Embedded 1 to 8 sets the source to an SDI embedded audio stream.

Output On Audio Loss

No PID, Silence. Specifies the action to take when input is Lost. No PID is for

dropping the audio PID from the stream, Silence is for encode silence.
NOTE: When No PID is selected, the reference to the PID is not removed from

the Program Map Table, so a Transport Stream analyzer will indicate a ghost

PID in the output Transport Stream.

Downmix Parameters

Downmix Type

Lo/Ro downmix, Lt/Rt downmix. Specifies the downmix type..

Downmix metadata override

Off, on. Specifies the downmix override.

Downmix metadata reversion mode

If available, maintain last received metatdata values, otherwise use fixed

settings, Use fixed settings. Specifies the downmix metadata reversion mode.

Center mix level

0.707 (-3.0 dB), 0.595 (-4.5 dB), 0.500 (-6.0 dB). Specifies the center mix

level.

Surround mix level

0.707 (-3.0 dB), 0.500 (-6.0 dB), 0 (-inf dB). Specifies the surround mix level.

Use Preferred Stereo Downmix if

Available

Off, on. Enables the preferred stereo downmix, if available.

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 174 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: