Ericsson AVP 4000 Скачать руководство пользователя страница 227

Страница: 227 / 422

Web GUI Control

1/1553-FGC 101 1790

Uen

5-43

Table 5.14 Audio Input Parameters

Parameter

Values

Description

Input Format

Uncompressed (LPCM), MPEG Layer II, Dolby

Digital, Dolby Digital Plus, Dolby E, AAC

Sets the input format used by the audio encoder.

Input Source

Off, Mute, Test Tone -18dB, Test Tone -20dB,

Embedded 1 to 8

Sets the source used by the audio encoder. No input is fed

to the encoder if Off is selected. Mute mutes the incoming

audio and encodes silence. Test Tone encodes a 1 kHz

test tone at the given amplitude (referenced to full scale),

Embedded 1 to 8 sets the source to an SDI embedded

audio stream.

Output On Audio Loss

No PID, Silence

Specifies the action to take when input is Lost. No PID is

for dropping the audio PID from the stream, Silence is for

encode silence.

NOTE:

When No PID is selected, the reference to the PID

is not removed from the Program Map Table, so a

Transport Stream analyzer will indicate a ghost PID in the

output Transport Stream.

Downmix Parameters

Downmix Type

Lo/Ro downmix, Lt/Rt downmix

Specifies the downmix type.

Downmix metadata

override

Off, on.

Specifies the downmix override.

Downmix metadata

reversion mode

If available, maintain last received metatdata

values, otherwise use fixed settings, Use fixed

settings.

Specifies the downmix metadata reversion mode.

Center mix level

0.707 (-3.0 dB), 0.595 (-4.5 dB), 0.500 (-6.0 dB). Specifies the center mix level.

Surround mix level

0.707 (-3.0 dB), 0.500 (-6.0 dB), 0 (-inf dB).

Specifies the surround mix level.

Use preferred stereo

downmix if available.

Off, on

Enables the preferred stereo downmix, if available.

Audio Status

Audio Locked

No, Yes

Specifies audio signal is locked.

Downmix active

No, Yes

Specifies the downmix is active.

Downmix active

Lo/Ro downmix, Lt/Rt downmix

Specifies the downmix type.

Level (L)

Specifies the left channel level.

Level (R)

Specifies the right channel level.

PCM Bypass Active

No, Yes

Specifies if PCM Bypass is active. Only valid for Dolby E

decoding.

Switchout Active

No, Yes

Specifies if switchout is active. Only valid for Dolby E

decoding.

Input Buffer Level

Specifies input buffer level.

Input Bitrate

Specifies input bit rate (in kbps).

Dolby Digital Sample

Rate

Specifies Dolby Digital sample rate in (Hz). Only valid for

Dolby Digital or Dolby Digital Plus decoding.

Input Coding Mode

N/A, ???

Specifies if input coding mode is selected.

Resync Count

Specifies the resync count.

Bad RC Packets

Specifies the number of bad timing packets received by

the audio processor.

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 227 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: