Ericsson AVP 4000, Справочное руководство, Страница: 45 / 422

Getting Started
1/1553-FGC 101 1790 Uen Y 3-9
4. Using the keys on the keypad, set the IP address, subnet mask and gateway
address.
5. Press the
Select
button to save or
Cancel
to discard the changes.
Note: It may be necessary to set the subnet mask to 0 in order to allow the IP
address to be changed.
IP Addresses on the unit must adhere to RFC3330 range of restrictions as listed in
the following table of allocated IP addresses.
Table 3.1 IP Address Restrictions
Block Present Use Reference
0.0.0.0/8 This Network [RFC1700, p4]
10.0.0.0/8 Private-Use Networks [RFC1918]
14.0.0.0/8 Public-Data Networks [RFC1700, p181]
24.0.0.0/8 Cable Television Networks ---
39.0.0.0/8 Reserved but subject to allocation [RFC1797]
127.0.0.0/8 Loopback [RFC1700, p5]
128.0.0.0/16 Reserved but subject to allocation ---
169.254.0.0/16 Link Local ---
172.16.0.0/12 Private-Use Networks [RFC1918]
191.255.0.0/16 Reserved but subject to allocation ---
192.0.0.0/24 Reserved but subject to allocation ---
192.0.2.0/24 Test-Net ---
192.88.99.0/24 6to4 Relay Anycast [RFC3068]
192.168.0.0/16 Private-Use Networks [RFC1918]
198.18.0.0/15 Network Interconnect Unit Benchmark Testing [RFC2544]
223.255.255.0/24 Reserved but subject to allocation ---
224.0.0.0/4 Multicast [RFC3171]
240.0.0.0/4 Reserved for Future Use [RFC1700, p4]
Note: The control network and data networks should not conflict. It is suggested
that the ranges for these networks are in the Private-Use Networks as listed
in the summary Table. IP Address range 192.168.10.x (subnet
255.255.255.0) is used for internal unit communications, so should not be
used for external communications.