Ericsson AVP 4000 Скачать руководство пользователя страница 259

Страница: 259 / 422

Web GUI Control

1/1553-FGC 101 1790

Uen

5-75

5.5.3.2.6

PCR Stream Configuration

The video encoding module can generate a separate PCR stream. The PCR stream

contains timing reference that can be used for decoding the elementary streams

included in the same service as the PCR stream itself. To use the PCR stream as a

timing reference for decoding, set the PCR PID parameter associated with the

service to the PID assigned to the PCR stream.

The following parameters are available in

Properties

widget on the

Service

Configuration

page when a PCR Stream is selected in the

Outputs

widget. The

same parameters can be accessed through the

Output/<output name>/Transport

Stream ID: <n>/Service List/<service name>/Component List/Slot <m> Video 1

PCR stream on PID <n>

menu on the front panel.

Table 5.58 PCR Stream Configuration Parameters

Parameters

Values

Description

PID

16 - 8190

The packet identifier assigned to packets carrying the

program clock reference values.

Bit Rate Weighting

Fixed

Not relevant for the PCR component. Read only

parameter.

5.5.4

Configuring Transport Streams

The section describes the parameters available for Transport Stream configuration.

5.5.4.1

Transport Stream Configuration

The Transport Streams generated by the unit are fully compliant with the MPEG-2

Transport Stream specification (ISO/IEC 13818-1), and consists of services that

carry one or more components.

The unit can form up to 24 output Transport Streams and output them through the

Transport Stream output interfaces.

A total of 256 services can be allocated between the output Transport Streams.

Each service can contain a maximum of 16 elementary streams. The elementary

streams that make up a service can be selected from the elementary streams

available from the option cards. The only restriction is that the elementary streams in

a service must all reference the same 27 MHz clock.

An elementary stream can be included in up to four services. Only one video

elementary stream can be assigned to a service, and the audio delay of audio

services should be matched to that video. Only one PCR can be associated with a

service.

Settings for IP and non-IP output Transport Streams differ slightly. The following

three sections define the general Transport Stream settings, the settings that are

related to the IP output, and the settings for the various services within the IP or

non-IP output Transport Streams.

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 259 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: