Ericsson AVP 4000 Скачать руководство пользователя страница 208

Страница: 208 / 422

Web GUI Control

5-24

1/1553-FGC 101 1790

Uen

Parameter

Values

Description

LDAP Base Dn

The root distinguished name used to query the LDAP server.

This information must be obtained from the administrator of the

LDAP server.

LDAP Entry Filter

Filter detail for the LDAP sever. This information must be

obtained from the administrator of the LDAP server.

Start TLS

Off, On

Enables TLS (transport layer security).
Off: Communication between the AVP and the LDAP server

will be in clear text.
On: Communication between the AVP and the LDAP server

will be encrypted. This may result in a slower response from

the AVP.

Default LDAP

Authentication

Behaviour

Positive Authentication, Negative

Authentication

If the LDAP server is out of contact for any reason, the

behavior of user authentication can be selected to either reject

the user (Negative Authentication), or accept the user and

permit the user to operate the web UI (Positive Authentication).
All activity is logged.

Note:

When LDAP Authentication is active, there is no special administrator

access. If

Negative Authentication

is selected, and the LDAP server is

unavailable, or mistakes have been made on entering the parameters for

the LDAP server, the AVP WILL BE LOCKED FOR ALL USERS. Ericsson

Customer Services must be contacted to assist on regaining access. It is

strongly recommended to use the

LDAP Test Authentication

setting to

check parameter entry and LDAP server access, before committing to the

LDAP Authentication

setting. See

Chapter 3, Getting Started: How to

Configure User Authentication.

5.5

Service Configuration Page

The

Service Configuration

page provides setup options for the outputs of the

device.

Figure 5.23 Service Configuration Video Page

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 208 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: