Ericsson AVP 4000 Скачать руководство пользователя страница 382

Страница: 382 / 422

Technical Specification

B-16

1/1553-FGC 101 1790 Uen Y

B.3.8

ASI I/O Option Card

The ASI I/O option card provides a means of outputting an MPEG-2 Transport

Stream over an ASI connection. Two outputs are provided which can be configured

as mirrored, such that the same TS is output from each connection, or independent,

such that a different TS is output from each.

Two input BNC connectors and associated

lock

LEDs are available for feeding the

unit with external Transport Streams.

Table B.17 ASI I/O Specification

Item

Specification

Standard

CENELEC EN50083-9 2002

Input Transport Stream format

188 byte or 204 byte. For 204 byte, the Reed-Solomon coding is

discarded and not acted upon.

Output Transport Stream format

188 byte

Safety Status

SELV

Connector Designation

ASI IN 1 / ASI IN 2 / ASI OUT 1 / ASI OUT 2

Connector Type

Ω BNC

Input Impedance:

(Resistive termination)

Ω

B.3.9

G.703 Transceiver Card

The G.703 Transceiver card provides one PDH (Plesiochronous Digital Hierarchy)

output interface that can be used for interfacing Transport Streams to PDH

networks. The interface is G.703 compliant, and can provide support for E carriers,

namely E31 (E3) and E32 (DS3) as specified in ITU-T Rec. G.703. The input

interface is not supported in this release.

Note

: The G.703 Transceiver Card has an input interface, but the G.703 input is

not supported in this release.

Table B.18 G.703 Transceiver Specification

Item

Specification

Standard

ITU-T Rec. G.703

Safety Status

SELV

Connector Designation

OUT

Connector Type

Ω BNC

Input Impedance:

(Resistive termination)

Ω

Содержание AVP 4000







































































































































































































































































































































































































































Результаты поиска

Содержание AVP 4000

Отзывы:

Ericsson AVP 4000, Справочное руководство, Страница: 382 / 422

Результаты поиска

Содержание AVP 4000

Отзывы: